अपनी प्राथमिकता निर्धारित करें
फ़ॉन्ट स्केलिंग
अप्राप्ति
पृष्ठ अनुमापन
अप्राप्ति
रंग समायोजन
भा.प्रौ.सं.कानपुर
Arvind Kumar

अरविंद कुमार

PhD (IISc Bangalore)

Professor, Department of Mechanical Engineering

शोध करना दिलचस्पी

Metal additive manufacturing ̶ DfAM, AM process, product and application development; Heat transfer, CFD, DPM; Multiphysics, multiscale modelling of manufacturing processes (additive manufacturing, casting, welding, surface coating), Process, defects, microstructure and properties predictions; Machine learning tools for manufacturing; Droplet interaction with surfaces; Thermal storage, Waste heat recover.

Office

Department of Mechanical Engineering
IIT Kanpur,
Kanpur 208016

विशेषज्ञता

Additive manufacturing technologies, Heat transfer and CFD modelling, Manufacturing process modelling, Solidification, Thermal storage technologies, Laser/plasma surface coating technologies.

शिक्षा

PhD, IISc Bangalore (2008)

M.Sc (Engg), IISc Bangalore (2003)

B.Tech, NIFFT, Ranchi (2001)

चयनित प्रकाशन

A. Kumar and P. Dutta, Modelling of transport phenomena in continuous casting of non-dendriticbillets, Inter. J. Heat Mass Transfer, 48, 2005, pp. 3674-3688.

A. Kumar and P. Dutta, Modelling of transport phenomena in continuous casting of non-dendriticbillets, Inter. J. Heat Mass Transfer, 48, 2005, pp. 3674-3688.

A. Kumar and P. Dutta, Modelling of transport phenomena in continuous casting of non-dendriticbillets, Inter. J. Heat Mass Transfer, 48, 2005, pp. 3674-3688.

A. Kumar and P. Dutta, Modelling of transport phenomena in continuous casting of non-dendriticbillets, Inter. J. Heat Mass Transfer, 48, 2005, pp. 3674-3688.

J. Jain, A. Kumar and P. Dutta, Role of plume convection and remelting on the mushy layerstructure during directional solidification, J. Phys. D: Appl. Phys., 40, 2007, pp. 1150-1160.

A. Kumar, H. Tabbara, S. Kamnis and S. Gu, Study of impingement of hollow ZrO2 droplets ontoa substrate, Surface and Coatings Tech., 220, 2013, pp. 164-169.

EU-Indo project in the New INDIGO Partnership Programme (NPP) of the European MemberStates and Associated States and the Indian Department of Science and Technology.

Paper on DC casting (Coupling macro-segregation and grain structure formation in direct chillcast aluminium alloy ingots, Light Metals, 2011, pp. 699-704.) is featured in a collection of bestresearch papers on aluminium cast shop from years 1971-2011 in the book Essential Readings inLight Metals, Vol 3, Cast Shop for Aluminium Production, J.F. Grandfield, D.G. Eskin (Eds.)

S. Patel, P. Reddy, A. Kumar, A methodology to integrate melt pool convection with rapid solidification and undercooling kinetics in laser spot welding, International Journal of Heat and Mass Transfer, 164, 2021, 120575.

A. Aggarwal, A. Chouhan, S. Patel, D. K. Yadav, A. Kumar, A. R. Vinod, K. G. Prashanth, N. P. Gurao, Role of impinging powder particles on melt pool hydrodynamics, thermal behaviour and microstructure in laser-assisted DED process: A particle-scale DEM CFD CA approach, International Journal of Heat and Mass Transfer, 158, 2020, 119989.

R. Sharma, A. Kumar, Track-scale simulations of selective laser melting to investigate development and mitigation of thermal stresses, Lasers in Manufacturing and Materials Processing, 6, 2019, 464-492. IF- 2.57

R.K. Shukla, A. Kumar, R. Kumar, D. Singh, A. Kumar, Numerical study of pore formation in thermal spray coating process by investigating dynamics of air entrapment, Surface and Coatings Technology, 378, 2019, 124972. IF-5.4

A. Kumar, S.K. Yadav, A. Mahato, A. Kumar, On-demand intermittent ice slurry generation for subzero cold thermal energy storage: Numerical simulation and performance analysis, Applied Thermal Engineering, 161, 2019, 114081. IF-6.46

V. Soni, A. Kumar, V.K. Jain, Fast waste heat recovery in 100 150 ᵒC using close-contact charging of nano-enhanced PCM composite, Journal of Molecular Liquids, 285, 2019, 347-361. IF-6.63

S.S. Reddy, V. Soni, A. Kumar, Diurnal thermal performance characterization of a solar air heater at local and global scales integrated with thermal battery, Energy, 177, 2019, 144-157. IF- 9.0

A. Kumar, M. Zaloznik, H. Combeau, B. Goyeau and D. Gobin, A numerical simulation of columnar solidification: influence of the inertia on channel segregation, Modelling Simul. Mater. Sci. Eng., 21, 2013, 045016 (16pp).

A. Kumar, H. Tabbara, S. Kamnis and S. Gu, Study of impingement of hollow ZrO2 droplets onto a substrate Surface and Coatings Tech., 220, 2013, pp. 164-169.

M. Bedel, M. Zaloznik, H. Combeau, A. Kumar, P. Jarry and E. Waz, Influence of transport mechanisms on nucleation and grain structure formation in DC cast aluminium alloy ingots, IOP Series-Mater. Sci. Engg, 27, 2011 012070.

V.K. Arghode, A. Kumar, S. Sundarraj and P. Dutta, Computational modeling of GMAW process for joining dissimilar aluminum alloys, Numer. Heat Transfer: Part A, 53, 2008, pp. 432-455.

A. Kumar and P. Dutta, Modelling of transport phenomena in continuous casting of non-dendritic billets, Inter. J. Heat Mass Transfer, 48, 2005, pp. 3674-3688.

पुरस्कार एवं फैलोशिप

Selection in Britain's Young Engineers to present research work in the House of Commons, 2012.

Selection in the Young Investigator Meeting - YIM Boston 2011, USA.

Marie Curie Fellowship of European Commission FP7 framework (in UK).

2006 Professor V.M. Krishna Sastri Best Paper Award in the International ISHMT-ASME Heatand Mass Transfer Conference held at IIT Guwahati.

INAE's national level Innovation Potential of Students Project Award - 2004 for master's thesis.

2018: Shortlisted for presentation for SwarnaJayanti Fellowship.

2016: Best Research Paper Award in the 3rd Annual International Conference on Metal & Manufacturing, Singapore, 2016.

2015: Shortlisted for presentation for INAE Young Engineer Award.

2014: IEI Young Engineers Award.

2012: Selection in Britain’s Young Engineers to present research work in the House of Commons.

2011: Young Investigator Meeting - YIM Award, 2011, Boston, USA.

2011: Marie Curie Fellowship, University of Southampton, UK, 2011-12.

2006: Professor V.M. Krishna Sastri Best Paper Award in the International ISHMT-ASME Heat Mass Transfer Conference held at IIT Guwahati.

2004: Indian National Academy of Engineering’s (INAE) national level Innovation Potential of Students Project Award - 2004 for Master's thesis.

परियोजना

Selected R & D Projects

Experimental and computational analysis of concentration polarization induced fouling in reverse osmosis (RO) feed channel, CSIR, 2020-2023.

Towards realization of additive manufacturing of aerospace structural component in India, Imprint II, 2019-2022.

A high-fidelity ray tracing heat source model and an Open MPI algorithm to predict melt pool hydrodynamics, thermal behaviour and grain structure in Selective Laser Melting process, SERB, 2021-2022.

Numerical and experimental framework for laser based additive manufacturing of high performance Ti-alloy parts, ISRO, 2018-2021.

Development of process map for additive manufacturing of Inconel, DST-AMT, 2018-2021.

Development of an open source solidification/melting simulation platform – OpenSol, Imprint I, 2017-2022.

Computational studies on phase change transport phenomena in ice slurry, SERB, Sep 2014 - March 2018.

Innovative thermal energy storage systems (INOTES), EU-Indo project, Oct 2014- March 2018.

Surface coating by thermal spraying of hollow particles, IIT Kanpur, 2014-2016.